Introduction
The goal of this assignment is to 1) propose a mechanism that your team can study as part of a larger laminate system, and 2) to get you comfortable sketching the kinematics of foldable systems in CAD, establishing constraints, and counting degrees of freedom.
Rubric
| Description | Points |
|---|---|
| Picture of prototype | 50 |
| Evaluation of 2D/3D | 10 |
| Drawing of Kinematics | 50 |
| DOF | 10 |
| Input/Output | 20 |
| Range of Motion | 20 |
| Discussion | 40 |
| Total | 200 |
Prerequisites
- Solidworks should be installed. It may be downloaded from https://myapps.asu.edu.